ANALISA CAMPURAN SAMPAH PLASTIK HDPE, DAN SERBUK KACA TERHADAP KEKUATAN TARIK BAHAN DAN UJI STRUKTUR MIKRO

Azka Rizqi, Mohammad (2022) ANALISA CAMPURAN SAMPAH PLASTIK HDPE, DAN SERBUK KACA TERHADAP KEKUATAN TARIK BAHAN DAN UJI STRUKTUR MIKRO. Skripsi (S1) thesis, Universitas Muhammadiyah Ponorogo.

	Text (persetujuan unggah karya ilmiah) persetujuan unggah karya ilmiah.pdf Download (130kB)
	Text (cover-pengesahan) Cover-pengesahan.pdf Download (885kB)
	Text (BAB 1) BAB 1 .pdf Download (57kB)
	Text (BAB 2) BAB 2.pdf Restricted to Registered users only Download (270kB) | Request a copy
	Text (BAB 3) BAB 3.pdf Restricted to Registered users only Download (645kB) | Request a copy
	Text (BAB 4) BAB 4.pdf Restricted to Registered users only Download (291kB) | Request a copy
	Text (BAB 5) BAB 5.pdf Restricted to Registered users only Download (46kB) | Request a copy
	Text (DAFTAR PUSTAKA) DAFTAR PUSTAKA.pdf Download (103kB)
	Text (lampiran) lampiran.pdf Download (596kB)
	Text (skripsi full) skripsi full .pdf Restricted to Repository staff only Download (2MB) | Request a copy

Abstract

Plastic waste is waste from humans which we can use as a very useful mixture. By adding other mixed materials such as glass powder with polymer. The method used in this study is the main injection machine with the process of weighing each composition of the material mixture according to the predetermined mixing table. Then the plastic is cut into small pieces as needed then melted and mixed with glass powder with an injection machine. Plastic and glass powder are mixed together with the polymer until combined. The mixture is melted with an injection machine until it reaches a temperature of 280 C in 10-15 minutes. Then after melting the mixture is directly injected and pressed into the mold. After that, let it sit for a few minutes to solidify. Furthermore, the new specimen can be opened from the mould. The percentage of HDPE (High Density Polyethylene) plastic mixture is 45%, 50%, 60%, and 65%. The tests carried out were tensile tests with reference to the ASTM D-638 Type II standard, and microstructure tests. The results of this study indicate the percentage tensile strength of a mixture of HDPE (High Density Polyethylene) with a stress value of 6.35 N/mm2. With a composition of 65% HDPE, 25% glass powder and 10% polymer. The mixture with the lowest stress value is 45% HDPE, 45% glass powder and 10% polymer. with a voltage of 3.65 N/mm2. The microstructure test on specimen mixture 4, namely HDPE 65%, showed that HDPE plastic dominated most of the specimens, therefore this fourth mixed specimen was the best specimen and had the greatest tensile strength than the previous specimen.

Item Type:	Thesis (Skripsi (S1))
Uncontrolled Keywords:	HDPE (High Density Polyethtylene), Serbuk Kaca, Polimer, Tegangan, Uji Struktur Mikro
Subjects:	T Technology > TJ Mechanical engineering and machinery
Divisions:	Faculty of Engineering
Depositing User:	ft . userft
Date Deposited:	19 Aug 2022 03:12
Last Modified:	19 Aug 2022 03:12
URI:	http://eprints.umpo.ac.id/id/eprint/9650

Actions (login required)

View Item