RANCANG BANGUN TEMPAT PAKAN TERNAK KAMBING BERBASIS IOT (INTERNET OF THINGS)

Abstract
One of the obstacles in the process of feeding goat farms is that farmers must provide feed on a scheduled basis as needed. Generally, goat breeders use manual techniques in caring for goats, especially in feeding which still uses manual methods and has a certain schedule for caring for goats. This certainly takes a lot of time and energy for goat breeders, so to overcome obstacles while making it easier for goat farmers in managing goat feed, the author raises the title. namely "Design of Automatic Goat Feeding Based on IOT (Internet Of Things)" to facilitate the task of farmers in managing goat feed. In this design the design method used is to create an IOT (Internet Of Things) based automatic goat feed daredevil module using the initial concept, create a Arduinomega 2560 program, set the valve on the feed reservoir to open, the conveyor runs to supply fermented feed to the end after that the limit sensor the switch to control the feed valve is closed again, and the motor that drives the conveyor stops, then to adjust the water in the reservoir to flow into the water reservoir using a solenoid valve, after that testing the module until data collection has been carried out by the author to find out and fix if there are problems. Feeding is given twice a day. The feeding time span is 120 seconds for one day, and livestock drinking is given automatically the pump will turn on when the water volume is low and the pump will turn off when the water volume is full, hopefully the goat drinking water reservoir will be available when the goat needs it.

Keywords : Fermented feed, Place feed, Conveyor, Arduino IDE, Monitoring